Sungrabba dash mat for Holden Commodore VB, VC, VH, VK, VL (1978–1988) – VL, built Mar 1986 – Aug 1988

Sungrabba Dash Mat to suit Holden Commodore VB, VC, VH, VK, VL (1978–1988)

VL, built Mar 1986 – Aug 1988 / Black / Standard
$126.00
Skip to product information
Sungrabba dash mat for Holden Commodore VB, VC, VH, VK, VL (1978–1988) – VL, built Mar 1986 – Aug 1988

Sungrabba Dash Mat to suit Holden Commodore VB, VC, VH, VK, VL (1978–1988)

Made to fit

  • Holden Commodore VB, VC, VH, VK, VL Sedan 1979–1988
  • Holden Commodore VB, VC, VH, VK, VL Sedan & Wagon 1979–1988
  • Holden Commodore VB, VC, VH, VK, VL Wagon 1979–1988
Check build dates
From $126.00inc. GST

SKU: DMHOL30-BK

✓ Added to cart

Customers fitting out the same vehicle also add:

    Checkout

    Why it's worth it

    Built for Australian conditions

    Stops the dash cracking

    UV bakes a bare dash top until it fades and splits. The mat takes the sun instead, and covers cracks that are already there.

    Cuts windscreen glare

    A bare dash reflects into the windscreen on a bright afternoon. The mat's surface soaks that reflection up.

    Made for your dash

    Shaped around the vents, sensors and speaker grilles of your exact dash, so it lies flat and looks factory.

    Stays put, lifts off

    4 hook Velcro sheets stick to the dash and grip the mat. It stays in place on corrugations and lifts off for cleaning.

    Airbag-safe design

    Engineered to allow your vehicle's airbags to deploy safely when required, and made not to shrink or fade.

    Handcrafted in Brisbane

    Made by No Bull Accessories in Queensland, backed by a 10 year warranty against manufacturing defects, and shipped free Australia-wide.

    About this dash mat

    A dash mat made for the Commodore VB, VC, VH, VK, VL

    If you own a Holden Commodore VB, VC, VH, VK, VL, you already know how hard it is to find a good dash for one. Original pads from 1978 onwards crack along the top and around the demister vents once the vinyl dries out. This Sungrabba mat is shaped to the Commodore dash so it covers the top in one piece, keeps the sun off what's left of the original and looks tidy doing it.

    The early Commodores, VB to VL, are now proper classics, and the VL in particular has a huge following.

    This one is made for the Sedan built from January 1979 to December 1988, the Sedan & Wagon built from January 1979 to December 1988, and the Wagon built from January 1979 to December 1988. Part number DMHOL30. If you're not sure which you have, the build date on the compliance plate will tell you.

    Glare, heat and cracking

    The top of the dash can get hot enough in summer to be uncomfortable to touch, and over time that heat and UV break down the surface. With a mat over it, the dash stays shaded and the reflection that washes out the windscreen is gone. If your dash already has cracks, the mat hides them.

    Black or grey, with or without stitching

    Choose black or grey. Black is the popular pick and suits most interiors; grey can look better in a lighter cabin. Standard mats are finished in matching thread, or for $10 more we'll edge yours in silver, red, gold, blue, or pink stitching to tie in with the vehicle's colour or trim. There are photos on the custom trim page.

    There's more than one version of this dash (VB, VC, VH, built Nov 1978 – Mar 1984; VK, built Mar 1984 – Mar 1986; VL, built Mar 1986 – Aug 1988). Pick the one that matches yours so the mat sits around the right vents, speakers or sensors.

    Fitting it yourself

    No tools needed. Wipe the dash clean, sit the mat in place, then stick the 4 hook Velcro sheets that come with it onto the dash near the corners and centre where the mat will cover them. Lower the mat and press it down over each one. It stays put but lifts off when you want to clean underneath. Avoid silicone dash sprays under the mat, because they stop the Velcro holding.

    Sungrabba dash mats are made in Australia by No Bull Accessories and carry a 10 year warranty. This one is in stock and ships free anywhere in Australia, and like the rest of our range it's matched to the Commodore by build date.

    Questions people ask

    Will this dash mat fit my Holden Commodore?
    It suits the Holden Commodore VB, VC, VH, VK, VL built Nov 1978 to Dec 1988. Pick the dash type that matches yours; send us a photo of your dash if you're not sure.
    How is it held in place?
    It comes with 4 hook Velcro sheets. Stick them to the dash, lay the mat over them and they grip its underside.
    What is custom trim?
    Coloured stitching around the edge for $10 more: silver, red, gold, blue or pink on black; red, blue, pink or gold on grey.

    Made here in Brisbane

    This dash mat is made at our factory in Acacia Ridge, by a family business that's been making Sungrabba mats for more than 20 years. When you buy one, you're keeping Australian manufacturing going.

    • Australian made and owned
    • Family business, 20+ years
    • Call the people who make it: 07 3340 4392

    Need it for another vehicle?

    Find everything we make for your other ute, wagon or the family car.