QMCC moulded vinyl flooring for the Ford Falcon XR, XT Ute & Panel Van (1966–1968), shown in black

QMCC Moulded Carpet & Vinyl Flooring to suit Ford Falcon XR, XT Ute & Panel Van (1966–1968)

Vinyl / Grey / Front
$438.00
Skip to product information
QMCC moulded vinyl flooring for the Ford Falcon XR, XT Ute & Panel Van (1966–1968), shown in black

QMCC Moulded Carpet & Vinyl Flooring to suit Ford Falcon XR, XT Ute & Panel Van (1966–1968)

Made to fit

  • Ford Falcon XR, XT Ute & Panel Van 1966–1968

Not for the Wagon, Sedan & Wagon or Sedan. Tap a body style to see the version that fits.

Check build dates
From $251.00inc. GST

SKU: FCFOR08F-PVC-GY

Front runs from the firewall back to the front seats. Rear covers the floor behind them.

We use this to check the shape around your gear lever before we make your flooring.

Adding underlay? It goes down before the carpet or vinyl. It makes the floor sit flat and cuts heat and road noise.
Add underlay or sound deadening

Fitting new flooring?

Finish the job properly

Underlay goes down before the carpet or vinyl. It makes the floor sit flat and, with acoustic felt, cuts heat and road noise. Sound deadening on the floor pan quietens things further.

Why it's worth it

Built for Australian conditions

Pre-formed to your floor

Moulded to the floor pan, tunnel and footwells of your vehicle, so it drops in without cutting or stretching.

14 carpet colours

Loop or plush carpet in 14 colours, from black and charcoal to original-style blues, reds and greens.

Vinyl that hoses clean

Hard-wearing vinyl in black, grey or brown for work vehicles and 4WDs that get muddy.

Quieter and more comfortable

Carpet turns a bare or vinyl work floor into a quieter, more comfortable daily driver.

Replaces a worn floor

Swap out torn, faded or missing factory carpet with one that fits like the original.

Made to order, fast

Made for you and dispatched in 1–2 business days, or 5–7 for some older models.

About this flooring

Moulded car carpet for the Ford Falcon XR, XT Ute & Panel Van

Original carpet in a Ford Falcon XR, XT Ute & Panel Van has had 55-plus years to wear through, fade and shrink, and most are long past saving. QMCC makes replacement moulded carpet or vinyl for the Falcon that's moulded to the shape of the floor pan, so it follows the tunnel and footwells the way the factory carpet did and doesn't have to be stretched into place.

The XR and XT were the Falcons that brought in the Australian-built V8 and the GT, and they're sought after today. Restorers want a floor that fits properly and looks original.

It suits the Ute & Panel Van built from January 1966 to December 1968. Part number FCFOR08F. If you're not sure which you have, the build date on the compliance plate will tell you.

Pieces available for the Falcon XR, XT Ute & Panel Van

  • Front: from the firewall back to the front seats, including the footwells and the tunnel.
  • Rear: the floor behind the front seats.
  • Front & rear: the full cabin floor, ordered together.

Choosing between loop, plush and vinyl

For a Falcon that works for a living, vinyl is hard to beat. It hoses clean, mud and sand don't stick to it, and it comes in black, grey or brown. Loop carpet is the tougher of the two carpets, with a tight weave that stands up to boots and looks like a factory floor. Plush has a deeper, softer pile and suits a vehicle that's more daily driver than work truck.

Carpet comes in 14 colours. Black and charcoal are the safe choices, and there are original-style blues, reds, greens and browns for restorations. Our colour guide shows every colour in photos.

For motor trimmers and DIY fitters

If you're a trimmer, you can open a trade account and order by part number. If you're doing it yourself, it's a weekend job with hand tools: seats and trims out, old floor up, underlay down, new floor in. Test fit before you trim anything, and follow our fitting guide for the details.

Restoring an older vehicle? Our classic car carpet page covers colour matching and the full list of classic floors we make.

Made to order

Every QMCC floor is made to order for your vehicle and dispatched in 1–2 business days. Shipping is worked out by weight at checkout. Because it's custom made it can't be returned for change of mind, so check your build date against the list on this page before ordering. Moulded carpet and vinyl carry a 12 month warranty against defects in materials and workmanship.

Questions people ask

Carpet or vinyl: which suits me?
Carpet is quieter and more comfortable for daily driving. Vinyl is the hard-wearing, hose-clean choice for work vehicles.
Does this fit every Ford Falcon?
It's moulded for the Ford Falcon XR, XT Ute & Panel Van built Jan 1966 to Dec 1968. Other body styles use a different shape.
How long does it take?
It's made to order and dispatched in 1–2 business days.

Moulded vs off the roll

Why moulded flooring fits better

QMCC mouldedCarpet off the roll
Pre-formed to the floor pan
Follows the tunnel and footwells
No cutting or stretching to shape
Sits flat around seat mounts
Carpet or vinyl to match

Need it for another vehicle?

Find everything we make for your other ute, wagon or the family car.